Logo/
Log in

Make a lecture like this from your own PDF

Drop a PDF, slides or notes here. You'll sign up, then yours starts.

0:00 / 5:07

0:00 / 5:07Why Measurement Matters
Quantity Surveying Measurement Methods: Applying IS 1200

Summary

Full transcript

0:00Quantity surveying measurement is more than recording dimensions. It provides the common basis for planning work, preparing estimates, writing specifications, checking completion, and settling payment. The central idea is consistency: the same physical work must be described, measured, and valued using an agreed method. IS 1200 supplies that framework for many civil-work categories, so measurement becomes transparent rather than dependent on individual interpretation. The general rule is to measure work net, in its fixed position, using the decimal system. Record dimensions to 0.01 metre, areas to 0.01 square metre, and volumes to 0.01 cubic metre. Some conditions are not merged into ordinary work: work in or under water, foul conditions, tidal conditions, and snow are measured separately. These rules make the measurement record precise while also identifying circumstances that affect construction effort.

1:05Under IS 1200 Part 1, excavation includes more than removing soil. Associated operations include setting out, site clearance, benching or battering, retaining dead men, forming steps in deep excavations, bailing rainwater, supporting pipes, and ramming the bottom. The source also distinguishes benching, battering, trench shields, and shoring. These are not interchangeable labels: they describe different ways of controlling excavation faces and protecting the work area. The zone of influence and angle of repose help explain why stability must be considered during measurement and execution.

1:46Dead men, also called tell-tales, help determine average excavation depth. On uniform ground they are placed at suitable intervals; on sloping ground, diagonal tell-tales are used; and on very uneven ground, levels are taken before and after excavation. After measurement and checking, no deduction is made for the tell-tales. Filling and excavation are separate items, each measured in cubic metres using length times width times depth. Stated allowances are 25 percent for loose stack, 10 percent for ordinary consolidated fill, and 5 percent when heavy machinery consolidates it. Lead is the average horizontal distance to deposition, while lift is the average vertical height. A typical estimate uses 50 metres lead and 1.5 metres lift.

2:38For concrete works, classify the work, describe it clearly, and book its dimensions consistently as length times breadth or width times height or depth. Concrete measurement includes stated no-deduction rules: reinforcement, openings up to 0.1 square metre, small pipes or conduits, small voids, limited chamfers or grooves, and ends of dissimilar materials are treated according to the prescribed rules. Precast concrete is different because the unit follows the product. Panels, slabs, and floors may use square metres; beams, columns, channels, kerbs, and posts may use running metres or numbers; tanks use numbers; jallies use square metres with thickness; and blocks use cubic metres.

3:25Brickwork dimensions are booked as length times breadth or width times height or depth, using metres, square metres, or cubic metres as prescribed. Descriptions include conveyance, handling, storage, and waste, while the rules also address deductions, special forms, and included ancillary work. Examples include cavity walls, chimney flues, pillars, circular brickwork, honeycomb work, and openings. Architectural details such as cornices, string courses, sills, drip courses, and corbels are measured in running metres. Stone masonry is generally measured in cubic metres, face work in square metres, and dressed-stone details wider than 10 centimetres in square metres; narrower details use running metres.

4:13IS 1200 Part 5 measures formwork as the actual concrete-contact surface, in square metres. The measurement includes supports, braces, ties, scaffolds, openings needed for concreting or cleaning, chamfer fillets up to 20 millimetres, cutting, and oil dressing. Dimensions are recorded to 0.01 metre and areas to 0.01 square metre. Formwork is classified separately for foundations, flat, vertical, sloping, small surfaces, arches, cylindrical shells, beams, columns, mouldings, and staircases. Key rules include no deduction for openings up to 0.4 square metre, measurement of rounded edges in running metres, and measuring beam and secondary-beam formwork to adjoining faces without deducting intersections.

Ask AI about this video

Answers cite the source. Free account, no credit card.