Logo/
Physics Formula Sheet: Formulas and How to Apply Them

Made with ScholarlyTurn your own files into documents like this

Physics Formula Sheet: Formulas and How to Apply Them

Physics Formula Sheet

Use this sheet by following three steps: identify the quantities, convert to SI units, then choose and rearrange the formula. Always write the equation first, substitute values with units, and check whether the answer is reasonable.

Physical Quantities, Units and Measurement

Common SI units

Useful conversions

\(1\,\mathrm{km}=1000\,\mathrm{m}\)

\(1\,\mathrm{h}=3600\,\mathrm{s}\)

\(1\,\mathrm{g}=0.001\,\mathrm{kg}\)

\(1\,\mathrm{cm^3}=1\,\mathrm{mL}\)

\(1\,\mathrm{L}=0.001\,\mathrm{m^3}\)

\(1\,\mathrm{kJ}=1000\,\mathrm{J}\)

\(1\,\mathrm{kW}=1000\,\mathrm{W}\)

Scalars and vectors

A scalar has magnitude only: mass, time, distance, speed, energy, temperature.

A vector has magnitude and direction: displacement, velocity, acceleration, force, weight.

For perpendicular vectors, use \(R=\sqrt{A^2+B^2}\). Use a scale drawing or components when directions are not perpendicular.

Kinematics

Core equations

\[

\text{speed}=\frac{\text{distance}}{\text{time}},\qquad v=\frac{d}{t}

\]

\[

\text{average speed}=\frac{\text{total distance}}{\text{total time}}

\]

\[

a=\frac{\Delta v}{\Delta t}=\frac{v-u}{t}

\]

where \(u\) is initial velocity, \(v\) is final velocity, \(a\) is acceleration, and \(t\) is time.

For constant acceleration:

\[

v=u+at

\]

\[

s=ut+\frac{1}{2}at^2

\]

\[

v^2=u^2+2as

\]

\[

s=\frac{(u+v)t}{2}

\]

How to apply: list the known values, identify the unknown, and choose an equation containing the unknown but avoiding any unnecessary unknowns.

Motion graphs

Distance–time graph: gradient = speed.

Displacement–time graph: gradient = velocity.

Velocity–time graph: gradient = acceleration.

Area under a velocity–time graph = displacement.

Area under a speed–time graph = distance travelled.

Free fall

For an object falling near Earth, use \(a=g\), where \(g\approx9.8\,\mathrm{m\,s^{-2}}\) or the value given in the question. Take upward or downward as positive, but use the same sign convention throughout.

Force and Pressure

Mass, weight and gravitational field

\[

W=mg

\]

\(W\) is weight in \(\mathrm{N}\), \(m\) is mass in \(\mathrm{kg}\), and \(g\) is gravitational field strength in \(\mathrm{N\,kg^{-1}}\).

Mass stays constant when location changes; weight changes if \(g\) changes.

Density

\[

\rho=\frac{m}{V}

\]

How to apply: use mass in \(\mathrm{kg}\) and volume in \(\mathrm{m^3}\) for density in \(\mathrm{kg\,m^{-3}}\). For an irregular solid, find volume by water displacement.

Pressure

\[

p=\frac{F}{A}

\]

Pressure increases when the same force acts over a smaller area. Use force in newtons and area in \(\mathrm{m^2}\).

For liquid pressure:

\[

p=\rho gh

\]

where \(h\) is depth below the surface. This is the pressure due to the liquid only; add atmospheric pressure if the question asks for total pressure.

Dynamics

Newton’s laws

\[

F=ma

\]

Use the resultant force, not just one individual force. If forces act in opposite directions, subtract them first.

First law: if resultant force is zero, velocity is constant or the object remains at rest.

Second law: a resultant force produces acceleration in the force’s direction.

Third law: interacting objects exert equal and opposite forces on each other; the forces act on different objects.

Resistive forces

Air resistance, drag and friction oppose motion. When resistive force increases until it equals the driving force, the resultant force becomes zero and the object reaches terminal velocity.

Energy, Work and Power

Work done and energy transfer

\[

W=Fd

\]

Use this when a force moves an object through distance \(d\) in the direction of the force. More generally:

\[

W=Fd\cos\theta

\]

where \(\theta\) is the angle between force and displacement.

Kinetic energy

\[

E_k=\frac{1}{2}mv^2

\]

Use mass in kilograms and velocity in \(\mathrm{m\,s^{-1}}\). Because velocity is squared, doubling speed makes kinetic energy four times larger.

Gravitational potential energy

\[

E_p=mgh

\]

Use the vertical height change, not the distance travelled along a slope.

Efficiency

\[

\text{efficiency}=\frac{\text{useful energy output}}{\text{total energy input}}\times100\%

\]

The same structure works with useful power output and total power input.

Power

\[

P=\frac{E}{t}=\frac{W}{t}

\]

Power is the rate of energy transfer. Use joules and seconds to obtain watts.

Kinetic Particle Model and Thermal Processes

Internal energy

Internal energy is the total kinetic energy and potential energy of the particles in a substance.

Heating increases internal energy.

During melting or boiling, temperature stays constant while energy changes the arrangement/separation of particles.

During cooling or freezing, internal energy decreases.

Specific heat capacity

\[

\Delta E=mc\Delta T

\]

Use when temperature changes without a change of state. \(c\) is specific heat capacity in \(\mathrm{J\,kg^{-1}\,K^{-1}}\), and \(\Delta T\) may be measured in degrees Celsius because a temperature change of \(1\,^{\circ}\mathrm{C}\) equals \(1\,\mathrm{K}\).

Specific latent heat

\[

E=mL

\]

Use during a change of state at constant temperature. \(L\) is specific latent heat in \(\mathrm{J\,kg^{-1}}\).

Fusion: solid \(\leftrightarrow\) liquid.

Vaporisation: liquid \(\leftrightarrow\) gas.

Thermal transfer

Conduction: particle collisions transfer energy, especially in solids.

Convection: warmer, less dense fluid rises while cooler, denser fluid sinks.

Radiation: infrared electromagnetic waves transfer energy; no medium is needed.

Dull, dark surfaces are better emitters and absorbers than shiny, light surfaces.

General Wave Properties

\[

v=f\lambda

\]

where \(v\) is wave speed in \(\mathrm{m\,s^{-1}}\), \(f\) is frequency in \(\mathrm{Hz}\), and \(\lambda\) is wavelength in metres.

\[

f=\frac{1}{T}

\]

where \(T\) is the period in seconds.

How to apply: convert frequency to hertz and wavelength to metres before substituting. When a wave enters a different medium, its frequency stays constant; its speed and wavelength may change.

Amplitude: maximum displacement; often relates to energy or loudness.

Frequency: number of complete waves per second; relates to pitch.

Transverse: vibrations are perpendicular to travel direction.

Longitudinal: vibrations are parallel to travel direction; includes compressions and rarefactions.

Electromagnetic Spectrum

All electromagnetic waves are transverse, transfer energy, travel through a vacuum at approximately \(3.0\times10^8\,\mathrm{m\,s^{-1}}\), and obey \(v=f\lambda\).

Order from lowest frequency to highest frequency:

Radio → microwave → infrared → visible → ultraviolet → X-ray → gamma.

As frequency increases, wavelength decreases and photon energy increases. Uses and hazards depend on frequency and intensity: radio and microwaves are used for communication; infrared for heating and thermal imaging; visible light for vision and optical fibres; ultraviolet for sterilisation but can damage skin and eyes; X-rays and gamma rays can image or treat disease but may damage cells and cause mutations or cancer.

Electric Charge and Current

Charge and current

\[

Q=It

\]

Charge \(Q\) is in coulombs, current \(I\) in amperes, and time \(t\) in seconds. Current is the rate of flow of charge.

Conventional current is defined as positive to negative outside a cell.

Electrons flow from negative to positive in the external circuit.

Potential difference and electromotive force

\[

V=\frac{E}{Q}

\]

Potential difference is energy transferred per coulomb. Electromotive force is energy supplied per coulomb by a source.

D.C. Circuits

Ohm’s law

\[

V=IR

\]

Use when resistance is constant. A non-ohmic component does not produce a straight-line \(V\)-\(I\) relationship because its resistance changes.

Series circuits

Current is the same everywhere.

Potential differences add: \(VT=V1+V_2+\cdots\).

Resistances add: \(RT=R1+R_2+\cdots\).

Parallel circuits

Potential difference is the same across each branch.

Currents add: \(IT=I1+I_2+\cdots\).

For two resistors:

\[

\frac{1}{RT}=\frac{1}{R1}+\frac{1}{R_2}

\]

Parallel resistance is always less than the smallest branch resistance.

Electrical energy and power

\[

E=VIt

\]

\[

P=VI

\]

\[

P=I^2R=\frac{V^2}{R}

\]

Use \(E\) in joules for energy transferred. For electricity bills:

\[

\text{cost}=\text{energy in kWh}\times\text{cost per kWh}

\]

\[

\text{energy in kWh}=\text{power in kW}\times\text{time in h}

\]

Practical Electricity and Safety

A fuse melts when current is too large, breaking the circuit.

Choose a fuse rating just above the appliance’s normal operating current.

A circuit breaker switches off rapidly when current becomes dangerous and can be reset.

The earth wire provides a low-resistance path for fault current, helping the fuse or breaker disconnect the supply.

Insulation, correct fuse ratings, double insulation, and keeping water away from electricity reduce hazards.

Electrical power is dangerous because current through the body can cause heating, burns, muscle contraction and heart disruption.

For an appliance current:

\[

I=\frac{P}{V}

\]

Choose the next available fuse rating above the calculated current, according to the values allowed by the course or question.

Radioactivity

Activity and half-life

\[

\text{activity}=\frac{\text{number of decays}}{\text{time}}

\]

Activity is measured in becquerels, where \(1\,\mathrm{Bq}=1\) decay per second.

After \(n\) half-lives:

\[

N=N_0\left(\frac{1}{2}\right)^n

\]

where \(N_0\) is the initial quantity and \(N\) is the remaining quantity. Also:

\[

n=\frac{\text{elapsed time}}{\text{half-life}}

\]

The same equations can describe count rate or activity, provided background radiation has been accounted for.

Radiation comparison

Alpha is dangerous inside the body but is stopped by skin.

Beta can cause burns and cell damage; it is useful in thickness monitoring.

Gamma can penetrate the body and is used in medical treatment and sterilisation, but requires careful shielding.

Nuclear equations

In alpha decay, the mass number decreases by 4 and the atomic number decreases by 2.

In beta-minus decay, the mass number stays the same and the atomic number increases by 1 because a neutron changes into a proton and an electron is emitted.

Gamma emission changes neither mass number nor atomic number.

Safety

Reduce exposure using time, distance and shielding: spend less time near a source, increase distance, use suitable shielding, and handle sources with tongs or remote equipment. Radioactive contamination means unwanted radioactive material has spread; irradiation means exposure to radiation without radioactive material necessarily being transferred.

Exam checklist

Write the formula before substituting.

Convert all quantities to compatible SI units.

Rearrange algebraically before inserting numbers.

Include the correct unit and sensible significant figures.

Use a vector sign convention consistently.

For graphs, identify whether the question wants a gradient or an area.

Check whether the formula assumes constant acceleration, a fixed resistance, or no change of state.

Distinguish energy transferred from power, which is the rate of transfer.